Le Tonkinois Varnish

B & D Murkin

UK main importers for

Le Tonkinois varnish

Flexidisc sander

Home Flexidisc FAQ Flexi packs Disc packs Items / Prices Buy / Contact us

Uniclamp and Unisharp

Drill vertical for grinding.

clampbox_big.jpg sharpenercarded_big.jpg

Point A       Adjusts arm from horizontal to vertical, can be locked in intermediate positions. 

Point B       Head rotates, can be locked in any position.

Point C       43 mm  diameter, the size of the accessory collar on most modern corded drills.

                   38 mm using red sleeve, fits some very old drills, use with care.

Point D       Adjusts for thickness of mounting surface up to a maximum of 50 mm   2 inches.


Uniclamp adjustment capabilities

Coarse stones adjacent to cone. 

Always ensure the drill is clamped securely and wear safety glasses when using the sharpener.

The sharpener should be positioned so the upper surface revolves away from you. (With normal direction of drill rotation the stones should be on your left as shown).

For initial sharpening of knives move the blade gently between the coarse brown stones. For finishing or to re-sharpen use the finer grey stones.  Use light pressure, do not press down heavily.

Place scissors, garden shears or flymo blades against the side of the stones, using the cone as a guide to get the angle. Holding at too steep angle can cut into the cone damaging it.

The stones can be changed over so either the coarse or the fine stones are adjacent to the plastic cone. Hex key for loosening the retaining ring is included.

Stones are approximately 55 mm diameter .

Unisharp knife and scissor sharpener

Sold singularly, as a pair, or as part of the Professional pack.

These are no longer available and we are looking at alternatives.

Contact us for further details.

Uniclamp drill mount

Strong polycarbon clamp allows the drill to be mounted in any position, horizontal vertical or in between, for use as a bench sander or grinder. Fits onto the 43 mm accessory collar on the front of reasonably modern drills. Does not fit cordless drills as these usually do not have a collar. A 38 mm sleeve is included to fit some old Black and Decker drills. Maximum mounting thickness 50 mm.

Drill and Flexidisc not included.

sharpener2_big.jpg sharpener3_big.jpg

Fine stones adjacent to cone.

clampsharp1_big.jpg clampflexi_big.jpg
Top ˄ Home Flexidisc Prices

Drill horizontal for sharpening.